Testing Guide For Dual-Ended Testing - Viavi Certifier40G User Manual

Testing Guide for Dual-Ended Testing

1. Connect FC1 to the Local TX port and SC1 to coupler 1.
2. Connect SC5 to the Local RX port and SC6 to coupler 2.
3. Connect FC2 to the Remote TX port and SC2 to coupler 4.
4. Connect SC3 to the Remote RX port and SC4 to coupler 3.
5. Connect the cord to be tested SC7 to coupler 1 and SC8 to coupler 3.
6. Connect the other cord to be tested SC9 to coupler 2 and SC10 to coupler 4.
FC1 SC5
TX RX
7. Press the AUTOTEST button to begin AUTOTEST.
8. If Bi-Direction measurement is selected, swap the position of SC1 and SC6, SC2 and
SC4.
FC1 SC5
TX RX
9.
Click "Step 2" to continue test.
SC1 SC7 SC8
SC6 SC9 SC10
SC6 SC7 SC8
SC1 SC9 SC10
SC4
SC2
FC2 SC3
TX RX
SC2
SC4
FC2 SC3
TX RX