Viavi Certifier40G User Manual page 19

Project Settings
Project Settings provides non-results oriented configurations before performing an
AUTOTEST.
Refer to User Manual – Certifier Copper Certification for more information on Project Settings.
Label Source
Refer to User Manual – Certifier Copper Certification or User Guide – List Based Testing for
more information.
List Based Testing
List based testing allows creation of label list in the J-Report software on PC and then bring
the list to Certifier. It further allows easy selection of labels from the list to help technician
select the cables to be tested quickly. This testing method is carefully optimized for typical
test work-flow, and it significantly improves productivity.
Refer to User Manual – Certifier Copper Certification or User Guide – List Based Testing for
more information.
System Settings
Device Type
Press the SETUP button > System Settings 1 > Device Settings > Device Type to set unit as a
Local or Remote unit. Device will reboot to take effect.
Refer to User Manual – Certifier Copper Certification for more information on System Settings.
DATA
The "DATA" button provides archive and data management ability to saved sites and
test results. Saved test results can be renamed or deleted in this option.