Viavi Certifier40G User Manual page 26

Fiber certificaton tester

Hide thumbs Also See for Certifier40G:

Table of Contents

For 1 jumper single-ended loopback,

1. Connect the FC and SC ends of the reference cord to the TX port RX port of the

adapter respectively.

Please ensure the fiber cables are cleaned using the cleaning kit provided in the kit.

FC1

SC1

2. Press the SETUP button > Testing Configuration and select "One Jumper" from

Single-Ended column. Select Single or Bi direction depending on requirement.

3. Press the TOOLS button > Set Reference and press the "ok" button to begin set

reference.

4. Check that the Set Reference result is ≤0.15 dB before proceeding. Clean or replace

reference cords if necessary, and set reference again if value exceeds 0.15 dB.

Table of Contents

Show Quick Links

Table of Contents