Introduction; Equipment - ESAB powercut 700 PT-39 Instruction Manual

US
This product is solely intended for plasma cutting. Any other use may result in
personal injury and / or equipment damage.
Read and understand the instruction manual
before installing or operating.
ESAB can provide you with all necessary cutting protection and accessories.
3

INTRODUCTION

The PowerCut 700 is a complete system for manual plasma cutting. It delivers
cutting power for severing materials up to 5/8 (16 mm) thickness.
3.1

Equipment

The power source is supplied with:
S mains cable, 10 ft (3 m)
S instruction manual
S return cable with clamp
S plasma cutting torch PT 39, 25 ft (7.5 m) or 50 ft (15.2 m), supplied as indicated
on page 75.
bp23aa
- 8 -
© ESAB AB 2012