2 INTRODUCTION
2
INTRODUCTION
The Rogue EM 125 is a self-contained single phase welding system that is capable of performing
GMAW (MIG) welding.
ESAB accessories for the product can be found in the "ACCESSORIES" chapter of this manual.
2.1
Equipment
Rogue EMP 125 is supplied with:
•
Welding power source
•
Integrated GMAW torch, 3 m (10 ft.)
•
Work clamp lead set, with 25 mm
•
Gas hose, 3 m (10 ft.)
•
Drive roll, 0.6/0.8 mm (0.023/0.030 in.) installed
•
Contact tips, 1 ea. 0.6/0.8/0.9 mm (0.023/0.030/0.035 in.)
•
Instruction manual
0447 954 001
OKC connector, 3 m (10 ft.)
2
- 10 -
© ESAB AB 2023