Introduction; Equipment - ESAB WARRIOR EDGE 500 DX Instruction Manual

2 INTRODUCTION
2

INTRODUCTION

The Warrior Edge 500 DX is integrated with a cooling unit and offers a complete multi-process
package supporting MIG/MAG, MMA, Live TIG and gouging. It is intended for use in combination with
RobustFeed Edge.
The power source is equipped with gateway to connect to the WeldCloud suite of applications,
including WeldCloud Productivity for production monitoring and WeldCloud Fleet for managing your
fleet of welding equipment.
For more information about the wire feed units, refer to the Instruction manual 0463 773 001.
For more information about WeldCloud, refer to the Quick start guide 0463 778 001.
ESAB accessories for the product can be found in the "ACCESSORIES" chapter of this manual.
2.1

Equipment

The power source is supplied with:
• 5 m (16 ft) 95mm return cable with earth clamp
2
• 5 m (16 ft) mains cable
• Instruction manual
• Quick start guide
• Safety instruction
0463 772 101 - 8 - © ESAB AB 2024