Introduction; Equipment - ESAB Rogue EM 190 PRO Instruction Manual

2 INTRODUCTION
2

INTRODUCTION

The Rogue EM 190 PRO is a self-contained single phase welding system that is capable of
performing GMAW (MIG) welding.
The power source is equipped with an integrated wire feed unit, digital voltage, amperage meters, and
a host of other features.
2.1

Equipment

Rogue EM 190 PRO is supplied with:
• Welding power source
• Tweco Fusion 180 MIG Torch 10 ft (3 m)
• Victor gas regulator/Flow gauge
• Gas hose 10 ft (3 m)
• Ground clamp lead set 10 ft (3 m), 16 mm
• OK AristoRod 12.50, 0.030 in. (0.8 mm), 2.4 lb (1.1 kg)
• Feed roll 0.023/0.030 in. (0.6/0.8 mm) V (Fitted)
• Feed roll 0.030/0.035 in. (0.8/0.9 mm) V (Spare)
• Feed roll 0.030/0.035 in. (0.8/0.9 mm) VK (Spare)
• Instruction manual
0447 956 001
, 35–50 OKC
2
- 10 - © ESAB AB 2023