Control Devices - ESAB powercut 700 PT-39 Instruction Manual

US
6.2

Control devices

1 Power switch 0/1
2 2/4 stroke
3 Air Pressure Indicator
4 Fault Indicator
1 Power switch
Turn the knob clockwise to 1 position for normal operation. Turn the knob
counterclockwise to switch 0 .
2 2/4 stroke
When in 2-stroke cutting mode, the torch activates when the trigger is pressed, and
deactivates when the trigger is released. In 4-stroke mode, the torch activates on the
first trigger press, after which it can be released for increased comfort during long
cuts. The torch is then deactivated by pressing the trigger again.
3 Air Pressure Indicator
When the green led is lit, it indicates that compressed air is in the system.
4 Fault Indicator
When the red led is lit, it indicates that a disturbance has occurred.
5 Over Temperature Indicator
When the yellow led is lit, the working temperature has exceeded the normal values.
It is turned off when the temperature is normal.
bp23aa
5 Over Temperature Indicator
6 Parts in Place (PIP)
7 Power ON Indicator
8 Output current control
- 15 -
© ESAB AB 2012