Removing Crankshaft And Balancer Shaft; Removing Transmission Shafts - KTM 2011 690 SMC EU Repair Manual

16 ENGINE

16.3.31 Removing crankshaft and balancer shaft

16.3.32 Removing transmission shafts

–
Install the special tool
Extractor (75029048000) (
Info
Use the 750 drill hole.
–
Pull off the section of the engine case.
Info
300076-10
Do not tension the section of the engine case.
The balancer shaft and the main shaft have a stop disk, these usually stick
to the bearing.
–
Take off the left section of the engine case.
–
Remove the special tool.
–
Remove dowels.
–
Remove O-ring
300077-10
–
Remove the crankshaft
300078-10
–
Remove the shift rail
300079-10
–
Swing shift forks
–
Remove shift drum
300080-10
with suitable screws.
2
p. 216)
.
3
and the balancer shaft
1
.
1
to one side.
2
.
3
.
2
116