Item Name
Analog Monitor Gain
Output Monitor Selection
Frequency/ current meter connected to the inverter can be calibrated by without using a resistor for
calibration. For the setting method, refer to Par. 2.4.2 "Calibration of Frequency Meter" on page 55 and
"MULTIFUNCTION ANALOG OUTPUT MONITOR SETTING" on page 76.
Selection of output between control circuit terminals 12 -- 11
21 = X X 0 X
nd
2
digit
0: Output frequency
1: Output current
2.7.21 OPERATION AT MOMENTARY POWER LOSS
Constant to be set
45
21
- -
95
Factory Preset
1.00
0000