Jog Operation - ACP Speecon 7200M3 Manual

4
MULTI-STEP SPEED
REFERENCE 1
5
MULTI-STEP SPEED
REFERENCE 2
Note: 1. Frequency reference can be changed only if it is selected by multi-speed reference.
2.The following condition must be satisfied :
Set frequency reference(Pn-13 to 16) ≦ Max. output frequency (Pn-02) ×
output frequency upper limit value (Pn-24)

2.7.6 JOG OPERATION

Item Name
Jog Frequency Reference Setting
Jog Reference Selection
Select the JOG mode ( closed between terminals 4 to 6 ) and JOG operation can be performed by
FWD/REV run command (when setting Pn-32 = 5 )
Depressing the JOG key on the digital operator performs the same operation.
MULTI-STEP SPEED
REFERENCE 1
FWD RUN COMMAND
REVRUN COMMAND
Constant to be set
17
32 , 33
Fref
TERMINAL
4
1
ON
2
- - 77
Factory Preset
6.0Hz
See page 63.
Pn-17
ON
ON
t