Options And Peripheral Units - ACP Speecon 7200M3 Manual

1.9 OPTIONS AND PERIPHERAL UNITS

Name (Code No.)
Extension 1m
Cable for 3H300C0820006
Digital 3m
Operator 3H300C0800005
Frequency 3M901D3760000
Meter
R .P. M. 3M901D4250005
Meter
Digital
Operator JNEP--13
Free kit
Operator JNEP--15
Analog
Operator JNEP--16
Unit
Braking ERF-150W
Resistor
(3H333C-001 )
Frequency
Setting
3H300D1260002
potentiometer
Model
Function
This extension cable is used
when the digital operator is used
after removing from the inverter
front cover.
The cable is available in 1-m and
3-m lengths.
60Hz/120Hz.
0~1800RPM
The 7200M3 operator has two
types of models: with digital
operator and with analog
operators. Models with digital
operators can be operated from
the digital operator only by main
circuit wiring.
Models with free kit operator are
operated by control circuit
terminals. There is only a LED
on the operator, can display the
inverter status
An exclusive control panel for
remotely setting frequency and
for turning the unit ON/OFF
using analog commands
(distance up too50m).
Shortens the motor deceleration
time by causing the regenerative
energy to be consumed through
the resistor. Available at 100%
deceleration torque at 3% ED for
resistor unit only.
Including 2k
knob and scale plate.
Ω
potentiometer,
- - 46
Installing Ref. No
position (3H358
On the front
cover
D0180005
Separately —
installed
Separately —
installed
On the
inverter front
cover
—
On the
inverter front
cover —
Separately
installed
—
Separately
installed
—
On the
inverter front —
cover
)