Description Of Digital Operating Section - ACP Speecon 7200M3 Manual

2. DESCRIPTION OF DIGITAL OPERATING SECTIONS
Run Command Key
Run Command Key to operate by digital operator.
STOP command is input. (Motor stops in either mode.)*
Red lamp lights by depressing STOP. *
Selects FWD or REV rum.
While depressing this key, jog speed is selected.
* RUN or STOP lamp changes in accordance with the following operations.
INVERTER
OUTPUT
STOP
FREQUENCY
RUN
Lamp
STOP
RUN
●
- -
Mode Display
Drive Mode Display
Rotation Direction Display
REMOTE Mode
Red lamp lights when controlled by control terminal commands.
Display
Display set, value of each function or monitoring values such as
Mode Selection
Depressing this key changes mode. (DRIVE or PRGM)
Display Selection
Depressing this key changes the Display.
Read/Write
Depressing this key changes the Display.
Numeral Change
Changes numeral such as set values and constant signals.
︿ : Increment key
﹀ : Decrement key
Digit Selection
Selects numerical digits. Selected digit blinks.
STOP
●
47
●