B Group Functions(Constant Pn-20 To 29) - ACP Speecon 7200M3 Manual

2.6.2 B Group Functions(Constant Pn-20 to 29)

Function Pn- Name
REV Run
Prohibit
Operator Stop
Key
Precedence
Run
Signal
Selection 2 20
Output
Frequency
UP/DOWN
operation
Stall
Prevention
During
Deceleration
Output
Analog
Monitor
Monitor
Selection
21
Selection
(Note 1)
S-curve
Accel/decel
Selection
Note:1. Analog monitor gain is set by constant Pn-45.
Description
4 3 2 1
0 REV run enabled
- - -
- - - 1 REV run disabled
- - 0 - STOP key effective from
control circuit terminals
during run
- - 1 - STOP key ineffective from
control circuit terminals
during run
- 0 - - Change the frequency
reference by Increament or
Decreament key,after
depress the STR key, the
output frequency starting to
up or down
- 1 - - The output frequency can
be up or down by
Increament or Decerament
key, directly.
0 - - - Stall prevention during
deceleration provided
1 - - - Stall prevention during
deceleration not
provided(when braking
resistor connected)
- - - 0
1 Not used
- - -
- - 0 - Analog monitor output
frequency
- - 1 - Analog monitor output
current
0 0 - - Not provided
0 1 - - 0.2 Sec
1 0 - - 0.5 Sec
1 1 - - 1.0 Sec
- - 65
Initial User Ref.
Settin Set Par.
g Values
2.7.2
-
0000
2.7.25
2.7.14
2.7.8
0000
2.7.9