Wiring; Terminal Cover Mounting/Removing - ACP Speecon 7200M3 Manual

1.4 WIRING

Connect main circuit and control circuit wiring securely as descrined in the following.

1.4.1 Terminal Cover Mounting/Removing

Please see the 7200M3 manual page 4.
For removing terminal cover, first remove the operator, then press the cover in direction of 1 (on both
sides) and, at the same time, lift in direction of 2 . For mounting, reverse the procedure. The figure below
shows how to unlock (in direction of 1 ) and lock (in direction of 2 ) the ribbon cable between the digital
operator and the inverter.
Please see the 7200M3 manual page 4.
- - 8