Constant Lock Protection - ACP Speecon 7200M3 Manual

2.3.2 Constant lock Protection (Only constant reading possible)
˙ The following shows an example where 0 is written in to constant (Pn-00)[password(Pn-00)
setting/reading and the first functions (constant Pn-01 to 19) reading enabled].
Description
Frequency reference
Set Value
PRGM
Turn on power
value is displayed.
○
2
○
1
DRIVE
supply
DATA
Pn-01
Select PRGM mode.
STR
Select constant (Pn-00 )
RESET
Display Pn-00 data.
Pn-00
DATA
Change the set value.
STR
01
Write in the set value.
00 ("End is displayed)
The data are displayed
00
Note: Differs according to the setting data before changing.
For details , refer to "DISPLAY OF OPERATOR" on page 67.
Key Operation Digital Operator Display
- - 56
Remarks
LED DRIVE OFF
(Note)
Displayed for 0.5 second.
Confirm the display.