Which Standards Apply? - Parker 590 series Product Manual

12-10
Certification for the Converter

Which Standards Apply?

Assuming installation to EMC instructions in this manual
"Filter" refers to a specified external filter.
Installation
Radiated RF Emission
Residential Conducted RF
Emission
Immunity
Radiated RF Emission
Commercial &
Light Industry Conducted RF
Emission
Immunity
Radiated RF Emission
Industrial Conducted RF
Emission
Immunity
Basic and Generic Standards
The standards that may apply to this unit come under two broad categories:
1. Emission - these standards limit the interference caused by operating (this) drive module.
2. Immunity - these standards limit the effect of interference (on this unit) from other electrical
and electronic apparatus.
The following table indicates the standards that the unit may comply with, dependent upon how
it is installed and used.
Basic and Generic Standards
EN55022 Class B (1994)
or
EN50081-1 (1992)
EN55022 Class B (1994)
or
EN50081-1 (1992)
EN50082-1 (1992)
EN55022 Class B (1994)
or
EN50081-1 (1992)
EN55022 Class B (1994)
or
EN50081-1 (1992)
EN50082-1 (1992)
EN55011 Class A (1991)
or
EN50081-2 (1994)
EN55011 Class A (1991)
or
EN50081-2 (1994)
prEN50082-2 (1992)
Table 12-1 Applicable Basic and Generic Standards
Unit used as
Relevant Apparatus
filter no filter
(EMC
compliance) compliance
applied for)
enclosure enclosure enclosure enclosure
590 Series DC Digital Converter
Unit used as a
Component
filter no filter
(EMC
may be