Setpoint Sum 1 - Parker 590 series Product Manual

6-48
Programming Your Application
MMI Menu Map
1
SETUP PARAMETERS
2

SETPOINT SUM 1

RATIO 1
RATIO 0
SIGN 1
SIGN 0
DIVIDER 1
DIVIDER 0
DEADBAND WIDTH
LIMIT
INPUT 2
INPUT 1
INPUT 0
SETPOINT SUM 1
This can be configured to perform one of a
number of functions upon a fixed number
of inputs.
Parameter Descriptions
RATIO 1
Analog input 1 scaling.
RATIO 0
Input 0 scaling.
SIGN 1
Analog input 1 polarity.
SIGN 0
Input 0 polarity.
DIVIDER 1
Analog input 1 scaling. Dividing by 0 (zero) results in a zero output.
DIVIDER 0
Input 0 scaling. Dividing by 0 (zero) results in a zero output.
DEADBAND WIDTH
Analog input 1 deadband width.
LIMIT
The Setpoint Sum
programmable limit is
symmetrical and has the
range 0.00% to 200.00%.
The limit is applied both
to the intermediate results
of the RATIO calculation
and the total output.
INPUT 2
Input 2 value. By default this is not connected to any analog input.
INPUT 1
Input 1 value. By default this is connected to Analog Input 1 (A2).
INPUT 0
Input 0 value. By default this is not connected to any analog input.
SPT. SUM 1 OUTPUT
Refer to the DIAGNOSTICS function block description, page 6-18.
1.0000 –
1.0000 – [208] RATIO 0
POSITIVE –
POSITIVE – [292] SIGN 0
1.0000 – [419] DIVIDER 1
1.0000 – [420] DIVIDER 0
0.0 % – [131] DEADBAND
105.00 % – [375] LIMIT
0.00 % – [423] INPUT 2
0.00 % – [100] INPUT 1
0.00 % – [309] INPUT 0
INPUT 2
INPUT 1
INPUT 0
LIMIT
SETPOINT SUM 1
– SPT. SUM 1 OUTPUT
[ 6] RATIO 1
[ 8] SIGN 1
Range: -3.0000 to 3.0000
Range: -3.0000 to 3.0000
Range: POSITIVE/NEGATIVE
Range: POSITIVE/NEGATIVE
Range: -3.0000 to 3.0000
Range: -3.0000 to 3.0000
Range: 0.0 to 100.0 %
Range: 0.00 to 200.00 %
-1
Range: -200.00 to 200.00 %
Range: -200.00 to 200.00 %
Range: -200.00 to 200.00 %
590 Series DC Digital Converter
– 0.00%
–
–
–
–
–
–
–
–
–
–
–