Table of Contents
Advertisement
1-2
Getting Started
Equipment Inspection and Storage
Packaging and Lifting Details
About this Manual
Note: Please read all Safety Information before proceeding with the installation and operation
Initial Steps
•
Check for signs of transit damage
•
Check the product code on the rating label conforms to your requirement.
If the unit is not being installed immediately, store the unit in a well-ventilated place away from
high temperatures, humidity, dust, or metal particles.
Refer to Chapter 2: "An Overview of the Converter" to check the rating label/product code.
Refer to Chapter 8: "Routine Maintenance and Repair" for information on returning damaged
goods.
Refer to Chapter 11: "Technical Specifications" - Environmental Details for the storage
temperature.
The packaging is combustible and, if disposed of in this manner incorrectly, may lead to
Save the packaging in case of return. Improper packaging can result in transit damage.
Use a safe and suitable lifting procedure when moving the drive. Never lift the drive by its
terminal connections. The larger drives are fitted with lifting points.
Prepare a clear, flat surface to receive the drive before attempting to move it. Do not damage
any terminal connections when putting the drive down.
Refer to Chapter 11: "Technical Specifications" - Mechanical Details for unit weights.
This manual is intended for use by the installer, user and programmer of the 590 Converter. It
assumes a reasonable level of understanding in these three disciplines.
of this unit.
Enter the "Model No" from the rating label into the table at the front of this manual. There is
also a column for you to record your application's parameter settings in the table in Chapter 10.
It is important that you pass this manual on to any new user of this unit.
This manual is for the following models from the 590 Converter Series:
• Three phase, regenerative, four quadrant armature controllers:
590 - for currents up to 720A
598 - external stack option for currents exceeding 720A
• Three phase non-regenerative, two quadrant armature controllers:
591 - for currents up to 720A
599 - external stack option for currents exceeding 720A
• 590H and 591H (further detail is provided in the separate Addendum manual)
Use the manual to help you plan the following:
Installation
Know your requirements:
•
certification requirements, CE/UL/c-UL conformance
•
conformance with local installation requirements
•
supply and cabling requirements
Programming (MMI or suitable PC programming tool only)
Caution
the generation of lethal toxic fumes.
590 Series Digital Converter
Advertisement
Table of Contents
