Optional Equipment - Parker 590 series Product Manual

Optional Equipment

Speed Feedback Option Boards
590 Series DC Digital Converter
Contact your local Parker SSD Drives office to order optional equipment.
Item
EMC Installation Guidelines for Modules and Systems
A Parker SSD Drives application manual detailing EMC requirements
590 Digital Section Control
A Parker SSD Drives application manual detailing the use of the
block diagram to implement open and closed loop control of driven
web section rolls
590 Digital Closed Loop Centre Winder
A Parker SSD Drives application manual detailing the use of the
block diagram to implement closed loop centre winders
ConfigEd Lite
Parker SSD Drives' Windows-based block programming software
External AC Supply (RFI) Filter
For Converters without internal filters, on cable runs in excess of 25
metres
Microtach Option Board
Two board types for connecting to a plastic or glass fiber Microtach
encoder
• Glass
•
Plastic
Encoder Option Board
A board to interface to a wire-ended encoder
Tacho Calibration Option Board
A switchable calibration board for interfacing to AC/DC analog
and/or digital tachogenerators
Comms Option Board (P1) Board
Two board types for supporting EI BYSYNCH or PROFIBUS
communication protocols for connection to other equipment.
•
EI BYSYNCH (RS422, RS485)
•
PROFIBUS
Each option board below is shown with the correct selection for the
SPEED FBK SELECT parameter.
The selections are ARM VOLTS FBK, ANALOG TACH,
ENCODER and ENCODER/ANALOG.
(ARM VOLTS FBK is default and requires no option board).
Standard and Optional Equipment
Table 0-1 Optional Equipment
13-11
Part Number
HA388879
HA388664
HA388202
Order by name
Refer to Chapter 11:
"External AC Supply
(RFI) Filters" for Part
Numbers
AH386025U001
AH386025U002
AH387775U001
(universal)
AH385870U001
AH385826U001
AH389918U001
MMI Menu Map
1 SETUP PARAMETERS
2 SPEED LOOP
SPEED FBK SELECT