Dell 5330dn User Manual page 16

required carriage return to each
line feed.
Date & Time (Only See
if HDD is installed)
DayLight Saving See
(Only if HDD is Time".
installed)
Quality
Use this menu selection to change settings that affect print quality and save toner.
Menu selection: Purpose:
Resolution Selects printed output resolution.
Darkness Lightens or darkens printed
output and conserves toner.
Finishing
Use this menu selection to define how the printer delivers the printed output.
Menu selection: Purpose:
Copies Set the default number of copies
by selecting any number from 1
to 999.
Orientation Choose the default orientation of
the print image on the page.
Margin Shift Set the margin of print materials
for one-sided printing. Increase
or decrease the value in 0.1 mm
increments.
Duplex To print on both sides of paper.
Downloaded from ManualsPrinter.com Manuals
LF+CR
"Setting the time and date".
"Setting Daylight Savings Manual
Auto
Off
Values:
600dpi
1200dpi
Draft Mode
Normal
Light
Dark
Values:
1 - 999
Portrait
Landscape
Top Margin
[0-250]
Left Margin
[0-164]
Off
Long Edge
Short Edge
Specifies the number of dots
printed per inch (dpi). The higher
the setting, the sharper the
printed characters and graphics
appear.
If the print jobs are mostly
l
text, select 600dpi-
Normal for the highest
quality printing.
Select 1200dpi-Best when
l
your job contains
bitmapped images, such as
scanned photos or some
graphics, that will benefit
from enhanced line
screening.
Lighten or darken the print on
the page by changing the toner
density setting. The Normal
setting usually produces the best
result. Use the Light toner
density setting to save toner.
Top Margin: Set the top margin,
l
from 0 to 250 mm.
Left Margin: Set the left margin,
l
from 0 to 164 mm.
Choose the binding edge as follows.
Long Edge: Flip on the long
l
edge.
Short Edge: Flip on the short
l
edge.