Download  Print this page

Installing Dell Software For Network Printing - Dell 5330dn User Manual

Mono laser printer.
Hide thumbs


Table of Contents
4. Select the printer requiring an IP address. The printer's default IP address is located on the printer's Configuration page.
5. When you finish setting the IP address for the printer, click Exit.

Installing Dell Software for Network Printing

Before connecting your printer to the network, you must first configure the printer's TCP/IP settings. See
the TCP/IP settings, install the Dell software on each network computer.
You can install the Dell software on the network computers locally or remotely.
You need administrative access to install printer drivers on the network computers.
1. Ensure that the printer is connected to your network and powered on. All applications should be closed on your computer before beginning installation.
For details about connecting to the network, see
2. Insert the Drivers and Utilities CD.
3. If necessary, select a language by clicking the Language button on the main screen.
4. Select Network Installation and click Next.
5. To install drivers on the computer for network operation, select Local Installation and click Next.
To install Dell software on remote computers or network servers on the same network, select Remote Installation. The domain administrator's ID and
password are required. Select the client computer(s) in the same domain on a network and click Next.
NOTE: Both server computer and client computer should be one of the following operating system: Windows 2000, Windows XP, Windows 2003 Server,
Windows Vista and Windows Server 2008.
NOTE: The server computer should be able to resolve the client computer name into an IP address.
6. The list of printers available on the network appears. Select the printer you want to install and then click Next.
Downloaded from Manuals
"Connecting the Printer to the Network.
"Set IP Address
Utility". After assigning and verifying


Table of Contents

   Related Manuals for Dell 5330dn

Comments to this Manuals

Symbols: 0
Latest comments: