After connecting the printer, you need to configure the network parameters on the operator panel. See
Powering On the Printer
The fusing area inside your printer becomes hot once the printer is powered on. To avoid injuries or burns, access this area only when
the system is powered off and has cooled down.
Do not disassemble the printer when it is powered on. If you do, it may give you an electric shock.
To turn on the printer:
1. Plug one end of the power cord into the power connector at the back of the printer and the other end into a properly grounded power outlet.
2. Press the power switch to power on the printer. The message SYSTEM INITIALIZING appears on the display indicating that the printer is now on.
To view your display text in another language, see
Understanding Operator Panel Menus
A number of menus are available to assist in changing printer settings. The diagram below shows the menus and items available in each menu.
Some menus may not appear in the display depending on options or models. If so, it is not applicable to your machine.
Dell 5330dn Mono Laser Printer Menu Function
Downloaded from ManualsPrinter.com Manuals
"Changing the Display
"Printing a Network Information