Download  Print this page

Printing To The Rear Door (face Up) - Dell 5330dn User Manual

Mono laser printer.
Hide thumbs

Advertisement

Table of Contents
Standard bin
Output expander-bin 1
NOTE:
For printing to the Standard bin, Output Expander and Duplexer, close the rear output tray. Use the rear output tray only for special media, such
as like envelope, labels and transparencies.
 
 
If necessary, expand the paper output extension to prevent print media from falling off the output tray.

Printing to the Rear Door (face up)

 
When using the rear door, paper comes out of the printer face up.
 
Printing from the Multi-purpose Feeder to the rear door provides a straight paper path. Using the rear door might improve the output quality with special
materials.
 
To use the rear door:
 
Open the rear door by pulling it down.
CAUTION:
The fuser area inside the rear door of your printer becomes very hot when in use. Use caution when accessing this area.
Printing to the Optional Output Expander (face down)
 
You can increase the paper output capacity of your printer by installing an Output Expander. An Output Expander holds 600 sheets of plain paper. See
"Installing an Output Expander."
NOTE:
Paper with a smaller size of width of 3"(76.2mm) and length of 5.82"(148.5mm) cannot be print out in the ouput expander.
Downloaded from ManualsPrinter.com Manuals
2
Plain paper up to 163
250 sheets of 75 g/m
2
plain paper
g/m
, Envelopes (Short -
edge Feed Only), Labels.
2
Plain paper up to 163
600 sheets of 75 g/m
2
paper
g/m
for installation instructions.
N/A - One is standard on
the printer and located on
the top of the printer.
1
For information on
installing an output
expander, see
"Installing
an Output Expander."

Advertisement

Table of Contents

   Related Manuals for Dell 5330dn

Comments to this Manuals

Symbols: 0
Latest comments: