Download  Print this page

Selecting An Output Location - Dell 5330dn User Manual

Mono laser printer.
Hide thumbs

Advertisement

Table of Contents
Integrated Forms
Envelopes 25% Cotton
Content Maximum
Weight- 24 lb
a.Short grain is preferred for papers over 135 g/m
 

Selecting an Output Location

 
The printer has two output locations: the output tray (face down) and the rear door (face up).
 
To use the output tray, ensure that the rear door is closed. To use the rear door, open it.
NOTE:
If paper coming out of the output tray has problems, such as excessive curl, try printing to the rear door.
NOTE:
To avoid paper jams, do not open or close the rear door while the printer is printing.
Printing to the Output Tray
Output bins available
 
The following table provides information on standard and optional output bin capability and connectivity.
Output Bin Name
Rear output Tray
Downloaded from ManualsPrinter.com Manuals
Dual-web paper
Polyester
Vinyl
Pressure-sensitive area
(must enter the printer
first)
Paper base (long grain)
Sulfite, wood-free or up
to 25% cotton bonds
2
.
Capacity
Maximum Weight &
Media Type Supported
2
100 sheets of 75 g/m
Plain paper 60-216 g/m
paper
Label, Envelopes,
Cardstock,
Transparencies.
(47 lb bond)
2
-
176 g/m
(47 lb bond)
-
2
176 g/m
(47 lb bond)
-
2
176 g/m
(47 lb bond)
2
-
135-140 g/m
(36-40 lb bond)
-
2
75-135 g/m
(20-36 lb bond)
-
2
75-105 g/m
(20-28 lb)
How Many Can Be
Installed on the Printer?
2
N/A - One is standard on
,
the printer and located at
the rear side.

Advertisement

Table of Contents

   Related Manuals for Dell 5330dn

Comments to this Manuals

Symbols: 0
Latest comments: