Download  Print this page

Network Installation - Dell 5330dn User Manual

Mono laser printer.
Hide thumbs

Advertisement

Table of Contents
If you select Custom Installation, select the components to be installed. You can also change the destination folder. Click Next.
5. When the installation is completed, you may print a test page. Click Finish to complete the installation and close the wizard. The installation is complete.

Network Installation

Assigning an IP Address
 
Before using the printer on the network, you must set an IP address, subnet mask, and gateway for the printer. If you want DHCP or BOOTP to automatically set
the IP address, a DHCP or BOOTP server must exist on the network.
 
If the network is using DHCP/BOOTP, an IP address is automatically assigned after connecting the network cable to the printer. In case there is no DHCP or
BOOTP, the printer will automatically assign the legacy IP address 192.0.0192 or local link address 169.254.xxx.xxx.
 
To configure the IP address manually, refer to the Drivers and Utilities CD. Print the Configuration page of the printer to see the current network configuration
and MAC address. You will need this information to configure the printer for the network.
1. Ensure that the printer is connected to your network and powered on. All applications should be closed on your computer before beginning installation.
2. Insert the Drivers and Utilities CD.
3. Select Set IP Address. The list of printers available on the network is displayed.
Downloaded from ManualsPrinter.com Manuals

Advertisement

Table of Contents

   Related Manuals for Dell 5330dn

Comments to this Manuals

Symbols: 0
Latest comments: