Custom Setup; Default Source - Dell 5330dn User Manual

MPF Select the paper type currently
loaded in the multi-purpose
feeder.
Type

Custom Setup

This menu selection is used to specify the width and length of the custom media.
Menu selection: Purpose:
Units Switches measurements between
millimeters and inches.
Tray <x> Set the paper width of custom
media.
Width
Tray <x> Set the paper length of custom
media.
Length
MPF Set the paper width of custom
media.
Width
MPF Set the paper length of custom
media.
Length

Default Source

Menu selection: Purpose:
Default Source Identifies the default paper
source.
Downloaded from ManualsPrinter.com Manuals
ISO B5
JIS B5
Statement
Executive
A5
A6
Monarch Env.
DL Env.
C5 Env.
C6 Env.
10 Env.
Custom
Plain Paper
Thick
Thicker
Thin
Colored
Preprinted
Recycled
Transparency
Labels
Card Stock
Bond
Letter Head
Values:
INCH INCH: displays paper
l
width and length in inches.
Millimeters: displays paper
l
Millimeters
width and length in
millimeters.
148 - 216 mm Set the custom width from 148 to
216 mm
210 - 355 mm Set the custom length from 210
to 355 mm
76 - 216 mm Set the custom width from 76 to
216 mm
127 - 355 mm Set the custom length from 127
to 355 mm
Values:
Tray <x> If you loaded the same size and
type of paper in two paper
sources (and the Paper Size and
MP Feeder
Paper Type menu items are
correctly set), the trays are
automatically linked. When one
paper source is empty, paper
automatically feeds from the next