Table of Contents
Advertisement
ATX Power Control Connector (CON1, CON2)
ATX feature connector (CON1) and soft power
switch connector (CON2)
The PCM-5862E/5862EL can support an advanced soft power
switch function if an ATX power supply is used. To enable the soft
power switch function:
1. Take the specially designed ATX-to-PS/2 power cable
(PCM-5862E/5862EL option item)
2. Connect the 3-pin plug of the cable to CON1 (ATX feature
connector).
3. Connect the power on/off button to CON2. (A momentary type
of button should be used.)
Important: Be sure that the ATX power supply can take at
22
PCM-5862E/EL User's Manual
least a 10 mA load on the 5 V standby lead
(5VSB). If not, you may have difficulty powering
on your system.
Wiring for ATX soft power switch function
Advertisement
Table of Contents
