Advantech PCM-9375 A3 Startup Manual

PCM-9375 A3 3.5" SBC w/AMD LX800, VGA, LCD,
LAN, USB 2.0, and SSD
Startup Manual
Packing List
Before you begin installing your card, please make sure that
the following materials have been shipped:
• 1 PCM-9375 A3 SBC
• 1 Startup Manual
• 1 Utility CD
• 1 Mini Jumper Pack
• 1 Audio Cable
• 1 IDE 44 Pin
• 1 USB 2 Port Cable
• 1 Parallel Port Cable
• 1 Keyboard/Mouse Cable
• 1 x COM2/3/4 Cable
• 1 x LAN Cable
If any of these items are missing or damaged, please con-
tact your distributor or sales representative immediately
Note 1:
For detailed contents of the PCM-9375 A3,
please refer to the enclosed CD Disc or disk (in
PDF format)
Note 2:
Acrobat Reader is required to view any PDF file
Acrobat Reader can be downloaded at:
http://www.adobe.com/products/acrobat/read-
step2.html (Acrobat is a trademark of Adobe.)
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
For technical support and service, please visit our
support website at:
http://support.advantech.com
This manual is for the PCM-9375 Rev. A3
Part No. 2006937502
Printed in China
p/n: 9689000002
p/n: 1700160160
p/n: 1701440351
p/n: 1703100121
p/n: 1700001977
p/n: 1700060202
p/n: 1700001971
p/n: 1701100202
1st Edition
June 2019
Specifications
Standard SBC Functions
• CPU: AMD Geode® LX800 processor, up to 500 MHz
• System Memory: 1x SODIMM socket, supports Double
Data Rate (DDR) SDRAM, Max, 512 MB, accepts
128/256/512 MB, DDR333 SDRAM
• 2nd Cache Memory: 128 KB on the processor
• System Chipset: AMD Geode LX800
• BIOS: Award 8Mbit Flash BIOS
• Watchdog Timer: 255 levels timer interval
• Expansion Interface: PC/104
• Battery: Lithium 3 V / 196 mAH
• Power Management: APM1.2, ACPI supported
• Enhanced IDE Interface: One channel supports up to
two EIDE devices. BIOS auto-detect, PIO Mode 3 or
Mode 4, supports UDMA 33 mode
• Serial Ports: Four serial RS-232 ports (CN19: COM1)
in one DB-9 connector and one Hirose 40 pin connector
(CN16: COM2/3/4). RS-422 and RS-485 can be config-
ured via CN18 connector and Jumper J3
• Parallel Port: One parallel port, supports SPP/EPPmode
• Keyboard/Mouse Connector: Supports one standard
PC/AT keyboard and a PS/2 mouse
• Audio: Supports AC97 Audio stereo sound
• USB: Four USB 2.0 compliant universal serial bus ports
• GPIO: 8-bit general purpose input/output
Solid State Disk
• Supports one 50-pin socket for CFC type I (type II
optional)
VGA/LVDS Interface
• Memory Size: Optimized Shared Memory Architecture,
supports up to 64MB frame buffer using system memory
• Resolution:
CRT resolution: up to 1600 x 1200 x 16 bpp at 100 Hz
and up to 1024 x 768 x 32 bpp at 60 Hz for TFT LCD
LCD Interface: Supports up to 24-bit TFT LCD (TTLsignal)
LVDS Interface: Supports one channel 24-bit LVDS
Interface (JEIDA mod)
• Dual Simultaneous Display: CRT+LCD, CRT+LVDS
Ethernet Interface
• Chipset Support: 2 x 10/100Mbps - Realtek RTL8139
• Ethernet Interface: IEEE 802.3 z/ab (1000BASE-T) or
IEEE 802.3u (100 BASE-T) protocol compatible
• Built-in Boot ROM (Realtek RTL8139)
• Connector: One RJ-45 connector, and one internal box
header
PCM-9375 A3 Startup Manual 1