Windows Nt Drivers Setup Procedure - Advantech PCM-5862E User Manual

Windows NT Drivers Setup Procedure

Step 1
1. Install Windows NT as you normally would for a VGA display.
2. First click the Start button, choose Settings and click on
Control Panel.
3. Choose the Display icon and click on the icon.
4. In the Display Properties window, click on the Settings tab.
5. Click on Change Display Type. In the Change Display Type
window, click on the Change button under Adapter Type. This
will bring up the Select Device window.
Step 2
1. In the Select Device window, click on the Other button. Enter
source directory where the Windows NT driver files are
located.
2. Press <ENTER> and the name of the Chips and Technologies
Video Accelerator driver will appear at the end of Models list
box. Scroll to the end of the list box and double click on the
driver.
3. Once the installation is complete, the system must be shut down
and restarted.
Step 3
1. Upon restarting your computer, select the desired display
settings from the Display property dialog box.
2. Click on Test to test the newly selected graphics mode. A color
test screen should appear, followed by the Testing Mode
window.
3. Click on Yes to continue. The Display Settings Change
window will appear.
4. Click on Restart Now for the new settings to take effect.
60 PCM-5862E/EL User's Manual