Table of Contents
Advertisement
Ethernet configuration
The PCM-5862E/5862EL is equipped with a high performance 32-
bit PCI-bus Ethernet interface which is fully compliant with IEEE
802.3U 10/100Mbps CSMA/CD standards. It is supported by all
major network operating systems and is 100% Novell NE-2000
compatible.
The medium type can be configured via the RSET8029.EXE
program included on the utility disk. (See Chapter 3 for detailed
information.)
100BASE-T connector (CN11)
100BASE-T connects to the PCM-5862E/5862EL via an adapter
cable to a 10-pin polarized header (CN11). For 10BASE-T RJ-45
operation, an adapter cable converting CN11 into a standard RJ-45
jack is required.
Network boot
The Network Boot feature can be utilized by incorporating the Boot
ROM image files for the appropriate network operating system. The
Boot ROM BIOS files are on the included utility disk.
Chapter 2 Installation
29
Advertisement
Table of Contents
