Advantech PCM-5862E User Manual page 70

4. After restarting the system, perform the following steps:
1). Open the OS/2 System folder.
2). Open the System Setup folder.
3). Open the Display Driver Install Object
This step will execute the Display Driver Installation
(DSPINSTL) utility program to finish installation of the new
drivers.
4). When the Display Driver Install window appears, select
5). When The Primary Display Driver List window appears,
6). When the installation is complete, you will need to
When the system has restarted, the display driver will be initialized
for 640x480x256 Color, 60Hz refresh. To switch to a different
video resolution color depth, or refresh rate, follow the steps
below.
62 PCM-5862E/EL User's Manual
Primary Display and then select OK.
select "Chips and Technologies 65550/554" from the
list of adapter types, then select OK to install the video
driver.
shutdown and then restart the system for the changes to
take effect. Make sure to remove the install diskette
before restarting the system.