Chapter 2 Installation; Jumpers; Jumper Location; Jumper Settings - Advantech PCM-4380F-M0A2E User Manual

Chapter 2

2.1 Jumpers

The PCM-4380 has a number of jumpers that allow you to configure your
system to suit your application. The table below lists the functions of the
various jumpers.
2.1.1

Jumper Location

Table 2.1: Jumpers
Label
J1
J2
J3
J4
2.1.2

Jumper Settings

Table 2.2: At/ATX Power Select (J1)
Setting
1-2
None
Note: In ATX mode, please use ATX power cable (PN: 1700002055:
20P/10P EPIC ATX POWER Cable 10CM) in the bundle package
to connect the power supply.
In AT mode, please use AT power cable (PN :1700003931: 2*4P/
10P EPIC AT POWER 15 cm) in the bundle package to connect
the power supply.
There are two 4 pin connectors on the AT power cable.
It's ok to connect single big 4P under AT mode.
The maximum current for (5 V, 12 V) through this "single big 4P".
Table 2.3: LCD Power (J2)
Setting
1-2
2-3
PCM-4380 User Manual
Installation
Function
AT/ATX Power Select
LCD Power
COM2 Setting
PCI VIO Setting
Function
AT Power Mode
ATX Power Mode
Function
+5 V
+3.3 V
8