Change Password - Advantech PCM-5862E User Manual

Change Password

To change the password, choose the PASSWORD SETTING
option form the Setup main menu and press <Enter>.
1. If the CMOS is bad or this option has never been used, a
default password is stored in the ROM. The screen will display
the following messages:
Press <Enter>.
2. If the CMOS is good or this option has been used to change the
default password, the user is asked for the password stored in
the CMOS. The screen will display the following message:
Enter the current password and press <Enter>.
3. After pressing <Enter> (ROM password) or the current
password (user-defined), you can change the password stored
in the CMOS. The password can be at most eight (8) characters
long.
Remember - to enable this feature, you must first select either
Setup or System in the BIOS FEATURES SETUP.
Enter Password:
Confirm Password:
Chapter 4 Award Bios Setup 51