Controlling Volume In Dos - Advantech PCM-5862E User Manual

Controlling volume in DOS

The ES1868/1869 audio controller provides software control on
the setting of audio volumes. The VOLUME CONTROL utility
located in the UTILITY subdirectory of audio driver diskette is
used to control the volume setting in DOS.
To control the volume setting, simply type the ESSVOL at the
DOS prompt with appropriate parameters. The syntex of ESSVOL
is shown as follows.
ESSVOL [/?] [/v:xx] [/l:xx] [/w:xx] [/m:xx] [/c:xx] [/s:xx] [/
a:xx]
no option
/?
/v
/l
/w
/m
/c
/s
/a
/p
xx
Display all volume settings.
Display this message.
Change master volume.
Change line volume.
Change wave volume.
Change microphone volume.
Change CD volume.
Change Synthesizer volume.
Change AuxB volume.
Change PC Speaker volume.
Volume. Note: no xx means 0
The value range of volume is 0 - 15.
[PC Speaker volume range is 0 - 7]
Chapter 6 Audio Setup 67