Profibus Dp (750-333, 750-343, 750-833) Fieldbus Coupler; Profinet Io (750-370) Fieldbus Coupler; Profinet Io (750-375, 750-377) Fieldbus Coupler; Table 51: General Module / Channel Parameters - WAGO 750-652 Manual

I/o-system 750
Hide thumbs Also See for 750-652:
Table of Contents

Advertisement

WAGO-I/O-SYSTEM 750
750-652 Serial Interface RS-232 / RS-485
11.1.2.2

PROFIBUS DP (750-333, 750-343, 750-833) Fieldbus Coupler

PROFINET IO (750-370) Fieldbus Coupler

The aforementioned fieldbus couplers allow module-specific configuration of behavior at diagnosis.

Table 51: General Module / Channel Parameters

Parameter
Diagnostics channel x
(x = 0)
*)
Default setting
11.1.2.3

PROFINET IO (750-375, 750-377) Fieldbus Coupler

The aforementioned fieldbus couplers allow module-specific configuration of
behavior at diagnosis.

Table 52: General Module / Channel Parameters

Parameter
Channel diagnostics
Channel x (x = 0)
Diagnostics: Top user
limit value exceeded
Channel x (x = 0)
*)
Default settings
Manual
Version 1.4.0
Value
*)
0 (lock)
1 (release)
Value
*)
0 (lock)
1 (release)
0 (lock)
*)
1 (released)
Explanation
The fieldbus coupler signals a diagnosis if the
I/O module reports the event:
Overflow (input buffer)
Diagnostics reported by the I/O module do not
lead to the signaling of a diagnosis by the
fieldbus coupler.
Diagnostics reported by the I/O module lead to
the signaling of a diagnosis by the fieldbus
coupler.
Explanation
The fieldbus coupler signals a diagnosis if the
I/O module reports the event:
Overflow (input buffer)
Diagnostics reported by the I/O module do not
lead to the signaling of a diagnosis or an entry
in the diagnostics database by the fieldbus
coupler.
Diagnostics reported by the I/O module with
activated station diagnostics and error type for
the corresponding signal channel lead to
dispatch of a diagnostic interrupt. The
respective error is entered by the fieldbus
coupler in the diagnostics database.
The fieldbus coupler signals a diagnosis if the
I/O module reports the event:
Overflow (input buffer)
Diagnostics reported by the I/O module do not
lead to the signaling of a diagnosis or an entry
in the diagnostics database by the fieldbus
coupler.
Diagnostics reported by the I/O module with
activated channel diagnostics and error type for
the corresponding signal channel lead to
dispatch of a diagnostic interrupt. The
respective error is entered by the fieldbus
coupler in the diagnostics database.
Appendix
77

Advertisement

Table of Contents
loading

This manual is also suitable for:

750-468750-468/000-001750-468/000-200750-468/025-000

Table of Contents