Troubleshooting And Error Message - Jadever 1.5K User Manual

9. Troubleshooting and Error Message

Error Status
E02 no.samp PCS no sampling
E04 EE.ERR
EEPROM access error
E05 out.ran
Overload condition
The
E07 E.Lo>Hi
limit value is less than the
lower limit value.
The
E08 CK.UNIT checking is different from the
current unit.
EU.nit improper accumulation unit
Possible Causes
weight-checking upper
unit set for weight-
Hotline: 0909 899 833
Vetek Weighing AB
Basic Inspection & Treatment
Press down the key
sampling.
Re-solder EEPROM or contact
Service .
Remove weight that is greater than
the scale capacity from the pan.
Reset the upper limit value
Disable weight-checking function
or reset HI/LO value.
Return to the previous
accumulation unit or accumulate
again.
N/G
to begin
13