Synectix VMS Lite User Manual page 58

Enter the new value in two-digit format that are in multiples of 33 milliseconds. The
value ranges from 01 to 99. Default value is 07. Too small a value may result in false
detection of a call as answered whereas too large a value may result in the caller
missing the first word spoken by the called party.
3.4.2 Usage Parameters
3.4.2.1 Rings to Pickup per Port
The Synectix VMS Lite can handle four incoming calls at a time on its four ports.
However, each port may be programmed separately for the number of rings to wait
before answering the call by going off-hook.
Valid range is from 0 to 9. By default, this value is 1 for each port.
3.4.2.2 Conflict Timer Value
Conflict Timer Value is the time for which the Synectix VMS Lite waits for the caller to
dial the second digit after the caller has dialed the first digit.
If the second digit is not dialed before the conflict timer delay elapses, the first digit is
treated as a Single digit dial entry and the call is transferred as per the Single digit dial
plan. If that digit does not have any corresponding single digit plan entries, the call is
transferred to the Operator. If the second digit is dialed, the unit waits for further
entries if necessary and transfers the call accordingly.
This value ranges from 2 to 5 and is in seconds. Default value is 3.
3.4.2.3 Extension Length
Extension Length determines the number of digits present in an extension or in a
mailbox. Except operator extensions, all types of extensions and mailboxes depend on
Extension Length.
Synectix VMS Lite
57