Synectix VMS Lite
Press 4 for Mailbox Options. (2.2.4)
Press 5 to Send a Message. (2.2.5)
Press 6 for Reminder Call Options. (2.2.6)
Press 7 to Undelete a Message. (2.2.7)
2.2.1
Listen to New Messages
After you press 1 to listen to new message(s), Synectix VMS Lite plays the first new
message along with date and time stamp and prompts you with the following options:
Press 1 to Save the Message
Press 2 to Play the Next Message
Press 3 to Delete the message
Press 4 to Replay the Current Message
Press 5 to Forward the Message
Press 6 to Play Date & Time Stamp
Save Message: You may save the message by pressing 1. Once you listen to a new
message, it is regarded as a saved message when you skip to the next message, even
though you did not press 1 to save it.
Play Next Message: This option plays the next message if there is one more new
message. After you press 2, the next new message is played and the same options are
available as before. If there are no more new messages, the unit prompts with "This is
the last message".
Delete the Message: This option deletes the current message from the list of
messages for that mailbox. You may restore this message by pressing 7 in the previous
menu (using the option "Undelete a Message" as explained in section 2.2.7)
Replay the Current Message: Synectix VMS Lite repeats the current message along
with the date & time stamp.
Forward the message: When you press 5 for the option "Forward the Message",
Synectix VMS Lite responds with:
Press 1 to Send to a Mailbox.
Press 2 to Send to a Distribution List
If you press 1 to send the current message to a mailbox, you have to enter an existing
mailbox number so that Synectix VMS Lite may forward the message to that particular
mailbox.
If you select 2 to forward the current message to a distribution list, Synectix VMS Lite
gives you the following options:
Press 1 to Select All
Press 2 to Select Programmed List.
34
Need help?
Do you have a question about the VMS Lite and is the answer not in the manual?