Synectix VMS Lite User Manual page 55

2 port stand alone voice mail system
Table of Contents

Advertisement

Synectix VMS Lite
If this value set by the installer is too small, the Synectix VMS Lite may miss the first few
digits of the string or treat the digits as extension transfer digits. If this value is set too
high, outside callers may find a slightly longer silence between the time the unit
answers the call and the main greeting starts playing.
Wait Time Between Digits: This is the maximum time the unit waits in between digits
for the PBX to send the next digit. Enter the new value in two-digit format in the range
00 to 99. The actual wait time equals the entered value multiplied by 10 milliseconds.
Default value = 0 (disabled)
If the next digit is not received by the time this wait time elapses, the unit transfers the
call to the Operator.
Mailbox Login String: This is the string to be dialed by a user to gain access to his/her
mailbox. This string may also be programmed as a Speed Dial Key on the user's phone
to allow single key access to his/her mailbox. Allowed alphabets are 'E', 'e', and P ', 'p'.
Example: *#E
Busy / No answer strings :
Allowed alphabets are 'e', 'p', 'i', 'a', 'b', 'c', 'd' and their capitals.
The Busy / No answer strings is a stream of characters sent by the PBX to the Synectix
VMS Lite to signal the status of a call which was transferred by the Synectix VMS Lite
earlier.
54

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VMS Lite and is the answer not in the manual?

Table of Contents