Synectix VMS Lite User Manual page 27

Synectix VMS Lite
When you select the "PBX Parameters" programming menu, the Synectix VMS Lite
prompts you with:
Press 1 to Edit Hook-flash Timing (1.5.1.1)
Press 2 to Edit Off-hook To Message Delay (1.5.1.2)
Press 3 to Edit Delay after Hook-flash (1.5.1.3)
Press 4 to Select Dialing Mode (1.5.1.4)
Press 5 for Message Waiting Lamp Parameters (1.5.1.5)
Press 6 for In-band String (1.5.1.6)
Press 7 for Transfer & Retrieve Strings (1.5.1.7)
Press 8 for Cadence Values (1.5.1.8)
1.5.1.1
The hook flash duration is programmable in steps of 50 msec (0.05 sec) from 0 to 2.45
seconds. If the Hook Flash duration is too short, the caller hears the digits being dialed
by the PBX when the call is to be transferred to the extension. If the Hook Flash
duration is too long, the call is disconnected.
The valid range is from 01 to 49, where Hook flash duration = nn x 0.05 sec. The Default
value = 06 (300 ms)
1.5.1.2
This value determines the delay period between the unit going off hook and the start
of the message playing.
Enter a value in the range 0 to 9 where n x 0.2 sec gives the total delay period. The
Default value = 5.
If this value is too small, the caller may miss the first few syllables or the first word of
the main greeting.
1.5.1.3
This value determines the delay period after hook flashing and before dialing the digits
for transferring a call.
Enter a value in the range 0 to 9 where n x 0.5 sec gives the total delay period. Default
value = 2
If this value is too small, the PBX will miss one or more of the digits dialed by the unit
for transferring the call.
1.5.1.4
The available options are:
Tone
Pulse
Long Tone
26
Hook-flash Timing:
Length of entry = fixed 2 digits.
Off-Hook to Message Delay:
Delay after Hook-flash:
Dialing Mode: