Synectix VMS Lite
Press 3 For Fully supervised Mode of Call Transfer.
Once you choose any one of these three options, Synectix VMS Lite prompts you:
<...... mode of call transfer is enabled>.
Default : Fully supervised mode of call transfer.
1.5.2.6
You have to enter this value in two-digit format. The value for this field may vary from
10 to 49 (both inclusive). Default value is 10. The value for this field gets multiplied by
33 milliseconds.
1.5.3
Listen to Serial Number
This option may be used to find out the serial number of different units in the field for
maintenance etc. The Synectix VMS Lite prompts the serial number of the unit and
returns to the previous menu.
32
Hang-up Tone Detection Time:
Need help?
Do you have a question about the VMS Lite and is the answer not in the manual?