Mitsubishi GOT2000 Series Connection Manual page 577


Calculating consumed current
For using multiple extension units, a bar code reader, or a RFID controller, the total current for the extension units,
bar code reader, or RFID controller must be within the current that the GOT can supply.
For the current that the GOT can supply and the current for the extension units, bar code reader, or RFID controller,
refer to the following tables. Make sure that the total of consumed current is within the capacity of the GOT.
(1) Current supply capacity of the GOT
GOT type
GT2712-S
GT2710-S
GT2710-V
GT2708-S
GT2708-V
(2) Current consumed by an extension unit/barcode reader/RFID controller
Module type
GT15-QBUS,
GT15-75QBUSL,
GT15-ABUS,
GT15-75ABUSL,
GT15-RS2-9P
GT15-RS4-9S
GT15-RS4-TE
GT15-J71GP23-SX
GT15-J71GF13-T2
GT15-J71LP23-25
GT15-J71BR13
GT15-J61BT13
*1 Value used for calculating the current consumption of the multi-channel function.
For the specifications of the unit, refer to the manual included with the unit.
*2 When the GOT supplies power to a barcode reader or an RFID controller from the standard interface, add their consumed
current. (Maximum value is less than 0.3 A)
Capacity
(A)
Consumed
current
(A)
GT15-QBUS2,
*1
0.275
GT15-75QBUS2L
GT15-ABUS2,
0.12
GT15-75ABUS2L
0.29
0.33
0.3
1.07
0.96
0.56
0.77
0.56
Module type
GT27-V4-Z
GT27-R2-Z
GT27-V4R1-Z
GT27-ROUT-Z
GT27-MMR-Z
GT15-SOUT
GT15-DIO
GT15-DIOR
Bar code reader
19. MULTI-CHANNEL FUNCTION
19.3 GOT Side Settings
19
Consumed
current
(A)
*1
0.12
*1
0
*1
0.12
*1
0.11
*1
0.27
0.08
0.1
0.1
*2
19 - 9