Approvals, Certificates, Standards; X-300 Product Group; Approvals, Certificates - Siemens SCALANCE X-300 Manual

Approvals, certificates, standards

9.1

X-300 product group

9.1.1

Approvals, Certificates

Note
The specified approvals apply only when the corresponding mark is printed on the product.
You can check which of the following approvals have been granted for your product by the
markings on the type plate.
EC directives
SIMATIC NET products meet the requirements and aims of the following EC directives.
EMC directive (electromagnetic compatibility)
The SIMATIC NET product meets the requirements of the EC Directive:
2004/108/EEC "Electromagnetic Compatibility"
The product is designed for use in the following areas:
Area of application
Industrial area
Personal injury and damage to property may occur.
The installation of expansions that are not approved for SIMATIC NET products or their
target systems may violate the requirements and regulations for safety and electromagnetic
compatibility.
Only use expansions that are approved for the system.
SCALANCE X-300
Operating Instructions, 10/2010, A5E01113043-10
Emission
EN 61000-6-4 : 2007
WARNING
Requirements
Immunity
EN 61000-6-2: 2005
9
201