Approvals, Certificates, Standards; X-300 Product Group; X-300 Approvals, Certificates - Siemens SCALANCE X320-3LD FE Operating Instructions Manual

Approvals, certificates, standards

9.1

X-300 product group

9.1.1

X-300 approvals, certificates

Approvals issued
Note
Issued approvals on the type plate of the device
The specified approvals apply only when the corresponding mark is printed on the product.
You can check which of the following approvals have been granted for your product by the
markings on the type plate.
EC directives
SIMATIC NET products meet the requirements and aims of the following EC directives.
EMC directive (electromagnetic compatibility)
The SIMATIC NET products described in these operating instructions meet the requirements
of EC directive 2004/108/EC "Electromagnetic Compatibility" for the following areas of
application:
Field of application
Industry
Personal injury and property damage can occur
The installation of expansions that are not approved for SIMATIC NET products or their
target systems may violate the requirements and regulations for safety and electromagnetic
compatibility.
Only use expansions that are approved for the system.
● Keep to the installation guidelines
The devices meet the requirements if you adhere to the installation and safety
SCALANCE X-300
Operating Instructions, 05/2016, A5E01113043-20
WARNING
Emission
EN 61000-6-4 : 2007
Requirements
Immunity to interference
EN 61000-6-2 : 2005
9
223