Siemens SCALANCE X-300 Manual page 88

Description of the device
4.4 C-PLUG (configuration plug)
Inserting in the C-PLUG slot on the IE Switch X-300
Product group Slot
X-300 Rear of the device
X-300M
XR-300M Rear of the device
- right
X-300EEC Top of the housing
88
Figure C-PLUG
1. Remove the screw cover.
2. Insert the C-PLUG in the intended slot.
3. Close the screw cover again correctly.
1. Remove the cover.
2. Insert the C-PLUG in the intended slot.
3. Close the cover again correctly.
1. Open the slider.
2. Insert the C-PLUG.
3. Close the slider.
Operating Instructions, 10/2010, A5E01113043-10
SCALANCE X-300