Approvals, Certificates - Siemens SCALANCE X-400 Operating Instructions Manual

Approvals, Certificates

Note
The specified approvals apply only when the corresponding mark is printed on the
product. You can check which of the following approvals have been granted for
your product by the markings on the type plate.
CE Marking
SIMATIC NET SCALANCE X-400 Industrial Ethernet switches meet the require-
ments and aims of the following EU directives and comply with the harmonized
European standards (EN) for programmable logic controllers published in the Offi-
cial Journal of the European Communities:
● Directive 89/336/EEC "Electromagnetic Compatibility" (EMC Directive)
● Directive 73/23/EEC "Electrical Equipment Designed for Use within Certain
Voltage Limits" (Low Voltage Equipment Directive)
● Directive 94/9/EEC Equipment and Protective Systems intended for Use in Po-
tentially Explosive Atmospheres (Explosion Protection Directive).
The EU declarations of conformity are available for the responsible authorities ac-
cording to the above-mentioned EU directive at the following address:
Siemens Aktiengesellschaft
Automation and Drives
Industrial Communication SIMATIC NET
Postfach 4848
D-90327 Nuernberg, Germany
Operating Instructions for SCALANCE X-400 Industrial Ethernet Switches
C79000-G8976-C186-03
131