Approvals, certificates, standards
9.8 MM900 product group
9.8
MM900 product group
9.8.1
MM900 approvals, certificates
NOTICE
Issued approvals on the type plate of the device
The specified approvals apply only when the corresponding mark is printed on the product.
You can check which of the following approvals have been granted for your product by the
markings on the type plate.
EC directives
SIMATIC NET products meet the requirements and aims of the following EC directives.
EMC directive (electromagnetic compatibility)
The SIMATIC NET product meets the requirements of the EC Directive:2004/108/EEC
"Electromagnetic Compatibility".
The product is designed for use in the following areas:
Area of application
Industrial area
Use only approved components
The installation of components, accessories and expansions that are not approved for
SIMATIC NET products or their target systems may violate the requirements and
regulations for safety and electromagnetic compatibility.
Only use components that are approved for the system.
238
WARNING
Requirements
Emission
EN 61000-6-4: 2007
Immunity
EN 61000-6-2: 2005
Operating Instructions, 10/2010, A5E01113043-10
SCALANCE X-300