Siemens SCALANCE X-300 Manual page 208

Approvals, certificates, standards
9.2 Product group X-300M
EC directives
SIMATIC NET products meet the requirements and aims of the following EC directives.
EMC directive (electromagnetic compatibility)
The SIMATIC NET product meets the requirements of the EC Directive:
2004/108/EEC "Electromagnetic Compatibility"
The product is designed for use in the following areas:
Area of application
Industrial area
Personal injury and damage to property may occur.
The installation of expansions that are not approved for SIMATIC NET products or their
target systems may violate the requirements and regulations for safety and electromagnetic
compatibility.
Only use expansions that are approved for the system.
● Keep to the installation guidelines
● You can always find the latest documentation on the Internet!
● Working on the product
Note
The product was tested with a device that also complies with the standards listed above.
If the product is operated with a device that does not meet these standards, there is no
guarantee that the corresponding values will be adhered to.
208
Emission
EN 61000-6-4: 2007
WARNING
The product meets the requirements if you adhere to the installation and safety
instructions contained in this documentation and in the following documentation when
installing and operating the product.
The current descriptions of the currently available products can always be found on the
Internet under the specified entry IDs/Internet pages:
– SIMATIC NET Industrial Twisted Pair and Fiber Optic Networks Manual
8763736 (http://support.automation.siemens.com/WW/view/en/8763736)
– EMC Installation Guideline, Planning Guide
28518276 (http://support.automation.siemens.com/WW/view/en/28518276)
To protect the product from electrostatic discharge, personnel must first discharge any
electrostatic charge from their body before touching the product.
Requirements
Immunity
EN 61000-6-2: 2005
Operating Instructions, 10/2010, A5E01113043-10
SCALANCE X-300