Certifications And Approvals; X-300 Product Group; X-300 Approvals, Certificates - Siemens SCALANCE X-300 Series Operating Instructions Manual

Certifications and approvals

11.1

X-300 product group

11.1.1 Certifications and approvals
11.1.1.1

X-300 approvals, certificates

Approvals issued
Note
Issued approvals on the type plate of the device
The specified approvals apply only when the corresponding mark is printed on the product. You
can check which of the following approvals have been granted for your product by the markings
on the type plate.
EC directives
SIMATIC NET products meet the requirements and aims of the following EC directives.
EMC directive (electromagnetic compatibility)
The SIMATIC NET products described in these operating instructions meet the requirements
of EC directive 2004/108/EC "Electromagnetic Compatibility" for the following areas of
application:
Field of application
Industry
Machinery directive
The product is a component in compliance with the EC Machinery Directive 2006/42//EEC.
According to the machinery directive, we are obliged to point out that the product described is
intended solely for installation in a machine.
SCALANCE X-300
Operating Instructions, 11/2019, A5E01113043-24
Emission
EN 61000-6-4 : 2007
Requirements
Immunity to interference
EN 61000-6-2 : 2005
11
251